Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Amarr Cable & Drum Replacement: The Seguin Owner’s Guide
If you’ve got an Amarr garage door with a snapped cable or a grooved-up drum, here’s the straight answer: we stock Amarr-compatible cables and drums on the truck, and we can typically replace them same day in Seguin. Installed, you’re looking at $130 to $250 for most cable and drum replacements, depending on whether it’s one side or both and how much the drum has chewed through. Most folks in Seguin discover the problem two ways: the door’s suddenly crooked on the way up, or it makes a sound like a bag of nickels hitting the floor when the cable lets go and the door drops one corner.

A door is 200 pounds riding on two springs. That’s the part most people don’t realize until a cable snaps. When one cable goes, the whole door wants to lean, and every cycle after that grinds things worse.
Which Amarr Models This Applies To
We work on the full Amarr residential line you’ll find around Seguin: the Lincoln, Heritage, Stratford, Olympus, Classica, and Hillcrest series. The cable and drum setup varies by door height and weight, so the part that fits a 7-foot Lincoln won’t necessarily match an 8-foot Olympus. The quickest way to identify what you need is the door label on the side of the bottom panel: it’ll list the model and sometimes the door weight. Take a picture of it with your phone and read it to us on the phone. That saves half a call right there.
Amarr uses torsion spring systems on most current models, which means the cable wraps around a drum mounted on the torsion tube above the door. Drums come in different profiles depending on cable length and door weight. The wrong drum will wind that cable unevenly, and you’ll be replacing it again in a year. We prefer OEM Amarr parts when the door’s still under warranty, but there are honest aftermarket options that match or beat the original spec, and we’ll tell you which is which and why. We’re an independent shop, so we stock what works, not what a corporate parent tells us to stock. On top of Amarr, we carry cables and drums that fit LiftMaster, Chamberlain, and Genie openers when the opener’s the thing causing trouble.
Signs Your Amarr Cable & Drum Replacement Is Failing
- The door’s crooked when it goes up or down. One cable has more slack than the other. It’s usually stretched or about to snap, and the door’s riding on the rollers unevenly. Keep running it and you’ll bend a track or pop a roller out.
- You can see cable strands fraying near the bottom bracket. Texas heat dries the grease out of the cable over time. Once strands start separating, the rest is a matter of weeks, not months.
- The cable’s come off the drum and is wrapped around the torsion tube. This happens when the drum grooves wear down and the cable can’t seat. It usually takes the drum with it, which is why we replace both as a set.
- The door drops faster than it should on the way down. The cable and drum work with the spring to control the descent. When the drum’s worn, the door slips and jerks. It’s hard on the opener, the hinges, and eventually the spring.
- You hear a scraping or clicking from one side up top. A cable that’s off its groove will scrape the drum edge every cycle. That noise is metal on metal, and it’s telling you the drum’s already scarred.
Tell me what it’s doing and I’ll tell you what it needs, usually takes about two minutes. That’s Otto’s rule, and it’s saved more than a few Seguin homeowners from buying parts they didn’t need.
Replacement Cost & What’s Included
Here in Seguin, a single cable replacement runs $130 to $175 on most Amarr doors. A cable and drum on one side runs $175 to $250. If both sides need it, we bundle the job so you’re not paying twice for the trip and the setup time. The range depends on door height, drum style, and whether the spring needs adjustment while we’re in there, which it often does because a new cable sits differently than a stretched old one.
| Job | Installed Price in Seguin |
|---|---|
| Single cable replacement | $130-$175 |
| Single cable + drum | $175-$250 |
| Both cables + both drums | $250-$340 (bundled) |
| Add spring adjustment if needed | $60-$100 (quoted before work starts) |
Every price is quoted and agreed before any work starts. Not one of those “we’ll see when we get up there” situations. Otto’s been stung by that game from the customer side, and he won’t play it. The number we give you on the phone is the number you pay at the door. Parts and labor are covered under our 90-Day Done Right Promise. If it’s not right in ninety days, we make it right, and that’s in writing on the invoice, not a handshake you have to hope holds.
DIY or Call Us?
Here’s the honest split. You can safely inspect the cables: unplug the opener, lock the door, and look for fraying, slack, or a cable sitting outside the drum groove. You can take a picture so we can see it. What you should not do is remove a cable from a torsion spring system yourself. That spring holds hundreds of pounds of tension, and when it unloads, it does not care who’s standing there. I’ve seen what a wrench does to a knuckle when a drum lets go. It is not worth the hospital trip to save $130.
If the cable’s already snapped, leave the door alone. Don’t run the opener, don’t try to muscle it up. Call us at (830) 468-5158 and we’ll walk you through securing it until we get there. Our trucks run the streets around Weinert Park and King Street all week, so when you call from Seguin, you’ll probably be talking to someone who drove past your house this month.
FAQs
On a properly adjusted door with regular lubrication, cables last 7 to 10 years in the Seguin climate, but the humidity and the heat cycles along the Guadalupe River corridor can shorten that to 5 or 6. Drums usually outlast two or three cables, unless a cable’s been running off-groove, in which case the drum wears fast. We check them together on every cable job.
Cables don’t patch. A frayed or kinked cable is a failed cable, and any repair attempt just moves the failure point somewhere else. We replace them. Drums can sometimes be re-grooved if the wear’s light, but for what labor costs, a new drum is the better long-term call on Amarr doors.
Most single-cable and drum jobs take 45 minutes to an hour on site. Both sides runs closer to 90 minutes if the door needs rebalancing afterward. We carry the parts, so there’s no “come back tomorrow” unless you’ve got a rare custom door we need to order for.
Yes. We keep the common Amarr cable lengths and drum profiles for 7-foot and 8-foot doors stocked on every truck that rolls in Seguin. That’s the difference between same-day and next-week. Call (830) 468-5158 and Otto will tell you over the phone whether yours is a stock part, and if it is, we’ll have it on by this afternoon.
Call Otto’s Garage Door in Seguin
If your Amarr door’s rocking a broken cable or a chewed-up drum, call (830) 468-5158. A live person answers, day or night. We’ll quote you a number on the call and hold it when we get there. Free estimates, no trip charge inside the county, and if you’re a senior or a veteran, you’ll get 10 percent off, always. Locally owned and owner-operated since 2004, with a published address and license number you can look up before the truck even leaves the shop. And when we’re done, Otto’s name’s on the invoice, which means he’ll be back if it’s not right, and you’ll probably run into him at the hardware store either way.
Written by Otto Reinhardt, Owner, Otto’s Garage Door - Seguin, TX at Otto’s Garage Door, serving Seguin and nearby areas.






Before
After
Before
After
Before
After